Category Archives: Terminals

Connectwell TTECEPCSC2.5T DIN Rail Spring Clamp End Plate (2.5mm)

Connectwell-Din-Rail-Spring-Clamp-End-Plate-2-5mm-Connectwell-TTECEPCSC2-5T-p-To-make-complete-banks-of-terminal-blocks-end-plates-are-necessary-Connectwell-terminal-blocks-are-intended-to-be-mounted-on-rails-for-front-mounting-so-no-rear-access-is-necessary-The-open-side-of-last-terminal-block-in-row-of-the-assembly-must-be-closed-by-an-end-plate-p-Connectwell-TTECEPCSC2-5T-DIN-Rail-Spring-Clamp-End-Plate-2-5mm- » Check Price Now!

Connectwell TTECCSC2.5T2-2 DIN Rail Spring Clamp 2.5mm Terminal (2…

Connectwell-Din-Rail-Spring-Clamp-2-5mm-Terminal-2-In-2-Out-Connectwell-TTECCSC2-5T2-2-p-Multiple-connection-Spring-Clamp-terminal-blocks-are-a-reliable-solution-for-problems-posed-by-multiple-connections-The-terminals-eliminate-the-conventional-method-of-cross-connection-looping-saving-additional-space-The-terminal-blocks-provide-the-possibility-of-further-multiplication-of-connections-through-bridging-p-Connectwell-TTECCSC2-5T2-2-DIN-Rail-Spring-Clamp-2-5mm-Terminal-2-In-2-Out- » Check Price Now!

Connectwell TTECEPCSC2.5T2-2 DIN Rail Spring Clamp End Plate (2.5m…

Connectwell-Din-Rail-Spring-Clamp-End-Plate-2-5mm-2-2-Connectwell-TTECEPCSC2-5T2-2-p-To-make-complete-banks-of-terminal-blocks-end-plates-are-necessary-Connectwell-terminal-blocks-are-intended-to-be-mounted-on-rails-for-front-mounting-so-no-rear-access-is-necessary-The-open-side-of-last-terminal-block-in-row-of-the-assembly-must-be-closed-by-an-end-plate-p-Connectwell-TTECEPCSC2-5T2-2-DIN-Rail-Spring-Clamp-End-Plate-2-5mm-2-2- » Check Price Now!

Connectwell TTECCA801/1 DIN Rail Spring Clamp 2 Way Shorting Link …

Connectwell-Din-Rail-Spring-Clamp-2-5mm-Terminal-1-in-2-out-Connectwell-TTECCA801-1-p-These-blocks-are-used-to-connect-multiple-wires-in-a-single-Terminal-Block-thereby-eliminating-reliability-problems-encountered-when-connecting-multiple-wires-in-a-single-clamp-while-saving-time-and-space-CSC2-5T-4-E-D3-has-built-in-diode-for-polarity-protection-p-Connectwell-TTECCA801-1-DIN-Rail-Spring-Clamp-2-Way-Shorting-Link-for-2-5mm- » Check Price Now!

Connectwell TTECCSCG2.5T DIN Rail Spring Clamp 2.5mm Ground Terminal

Connectwell-Din-Rail-Spring-Clamp-2-5mm-Ground-Terminal-Connectwell-TTECCSCG2-5T-p-A-screwless-spring-clamp-ground-terminal-block-The-spring-clamp-is-operated-by-using-a-screw-driver-to-provide-an-access-to-wire-through-the-opening-in-the-Spring-clamp-The-wire-is-held-against-the-current-bar-directly-by-a-pre-stressed-spring-clamp-Specially-designed-alloy-feet-help-in-achieving-very-low-bonding-resistance-and-vibration-proof-grounding-CSCG-series-terminals-can-be-mounted-on-Din-35-rail-w » Check Price Now!

Connectwell TTECCSC4T DIN Rail Spring Clamp 4mm Terminal (1 In 1 Out)

Connectwell-Din-Rail-Spring-Clamp-4mm-Terminal-1-In-1-Out-Connectwell-TTECCSC4T-p-In-certain-applications-for-smaller-cross-section-range-of-wires-screwless-spring-terminal-blocks-are-available-In-spring-clamp-terminals-the-wire-is-held-against-the-current-bar-directly-by-a-pre-stressed-spring-clamp-The-spring-clamp-is-operated-by-using-a-screw-driver-to-provide-an-access-to-wire-through-the-opening-in-the-spring-clamp-The-wire-end-gets-clamped-on-to-the-current-bar-on-removal-of-the- » Check Price Now!

Connectwell TTECEPCSC4T2-2 DIN Rail Spring Clamp 4mm End Plate (2 …

Connectwell-Din-Rail-Spring-Clamp-4mm-End-Plate-2-In-2-Out-Connectwell-TTECEPCSC4T2-2-p-To-make-complete-banks-of-terminal-blocks-end-plates-are-necessary-Connectwell-terminal-blocks-are-intended-to-be-mounted-on-rails-for-front-mounting-so-no-rear-access-is-necessary-The-open-side-of-last-terminal-block-in-row-of-the-assembly-must-be-closed-by-an-end-plate-p-Connectwell-TTECEPCSC4T2-2-DIN-Rail-Spring-Clamp-4mm-End-Plate-2-In-2-Out- » Check Price Now!

Connectwell TTECCSCG4T DIN Rail Spring Clamp 4mm Ground Terminal

Connectwell-Din-Rail-Spring-Clamp-4mm-Ground-Terminal-Connectwell-TTECCSCG4T-p-A-screwless-spring-clamp-ground-terminal-block-The-spring-clamp-is-operated-by-using-a-screw-driver-to-provide-an-access-to-wire-through-the-opening-in-the-Spring-clamp-The-wire-is-held-against-the-current-bar-directly-by-a-pre-stressed-spring-clamp-Specially-designed-alloy-feet-help-in-achieving-very-low-bonding-resistance-and-vibration-proof-grounding-The-terminals-can-be-mounted-on-Din-35-rail-with-other-te » Check Price Now!

IMO Jumper Bar Cc4/10

IMO DIN Rail Jumper Bars – IMO CC4/10, These jumper bars are for use with standard terminal blocks. IMO Jumper Bar Cc4/10 » Check Price Now!

IMO Feed Through Single Deck DIN Rail Terminal Er2.5beige

IMO ER Feed Through Single Deck DIN Rail Terminals – IMO ER2.5BEIGE, An ER2.5 type terminal that has been manufactured from thermoplastic raw materials. IMO Feed Through Single Deck DIN Rail Terminal Er2.5beige » Check Price Now!

IMO Feed Through Single Deck DIN Rail Terminal Er2.5blue

IMO ER Feed Through Single Deck DIN Rail Terminals – IMO ER2.5BLUE, An ER2.5 type terminal that has been manufactured from thermoplastic raw materials. IMO Feed Through Single Deck DIN Rail Terminal Er2.5blue » Check Price Now!

IMO Feed Through Single Deck DIN Rail Terminal Er4grey

IMO ER Feed Through Single Deck DIN Rail Terminals – IMO ER4GREY, An ER4 type terminal that has been manufactured from thermoplastic raw materials. IMO Feed Through Single Deck DIN Rail Terminal Er4grey » Check Price Now!

IMO Feed Through Single Deck DIN Rail Terminal Er4blue

IMO ER Feed Through Single Deck DIN Rail Terminals – IMO ER4BLUE, An ER4 type terminal that has been manufactured from thermoplastic raw materials. IMO Feed Through Single Deck DIN Rail Terminal Er4blue » Check Price Now!

IMO Feed Through Single Deck DIN Rail Terminal Er4red

IMO ER Feed Through Single Deck DIN Rail Terminals – IMO ER4RED, An ER4 type terminal that has been manufactured from thermoplastic raw materials. IMO Feed Through Single Deck DIN Rail Terminal Er4red » Check Price Now!

IMO Feed Through Single Deck DIN Rail Terminal Er35beige

IMO ER Feed Through Single Deck DIN Rail Terminals – IMO ER35BEIGE, An ER35 type terminal that has been manufactured from thermoplastic raw materials. IMO Feed Through Single Deck DIN Rail Terminal Er35beige » Check Price Now!

IMO Feed Through Double Deck DIN Rail Terminal Erd4beige

IMO ER Feed Through Single Deck DIN Rail Terminals – IMO ERD4BEIGE, An ERD4 type terminal that has been manufactured from thermoplastic raw materials. IMO Feed Through Double Deck DIN Rail Terminal Erd4beige » Check Price Now!

IMO Earth DIN Rail Terminal Erpe2.5/4

IMO Earth DIN Rail Terminals – IMO ERPE2.5/4, This DIN rail earth terminal can only be used on rail MR 35. The colour is yellow-green which complies with international standards. IMO Earth DIN Rail Terminal Erpe2.5/4 » Check Price Now!

IMO Earth DIN Rail Terminal Erpe6/10

IMO Earth DIN Rail Terminals – IMO ERPE6/10, This DIN rail earth terminal can only be used on rail MR 35. The colour is yellow-green which complies with international standards. IMO Earth DIN Rail Terminal Erpe6/10 » Check Price Now!

IMO DIN Rail Terminal End Plates Ep2.5-10beige

IMO DIN Rail Terminal End Plates and End Stops – IMO EP2.5-10BEIGE, A terminal end plate from IMO. It is suitable for the 2.5mm option and has been manufactured from polyamide 6.6 thermoplastic resin. IMO DIN Rail Terminal End Plates Ep2.5-10beige » Check Price Now!

IMO DIN Rail Terminal End Stop Es1beige

IMO DIN Rail Terminal End Plates and End Stops – IMO ES1BEIGE, A terminal end plate from IMO. It is suitable for the ES1beige option and has been manufactured from polyamide 6.6 thermoplastic resin. IMO DIN Rail Terminal End Stop Es1beige » Check Price Now!

IMO DIN Rail Fused Terminal Erf2beige

IMO-DIN-Rail-Isolating-Terminals-IMO-ERF2BEIGE-P-Disconnect-terminals-allow-open-circuit-without-disconnecting-the-conductors-by-a-disconnet-busbar-Disconnection-is-achieved-by-lifting-the-knife-contact-P-IMO-DIN-Rail-Fused-Terminal-Erf2beige » Check Price Now!

IMO DIN Rail Markers Mt5 (50 Pieces)

IMO-DIN-Rail-Markers-IMO-MT5-P-A-marker-to-fit-all-terminals-with-the-option-of-blank-numbered-or-custom-made-P-IMO-DIN-Rail-Markers-Mt5-50-Pieces- » Check Price Now!

IMO Jumper Bar Cc2.5/10

IMO DIN Rail Jumper Bars – IMO CC2.5/10, These jumper bars are for use with standard terminal blocks. IMO Jumper Bar Cc2.5/10 » Check Price Now!

ABB 1SNK910310R0000 10 Pole Jumper Bar 10mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK910310R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK910310R0000

ABB 1SNK922302R0000 2 Pole Jumper Bar 22mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK922302R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK922302R0000

ABB 1SNK900630R0000 White Label for LH Label Holder

ABB-White-and-yellow-Label-for-LH-and-LH-R1-Label-Holders-ABB-1SNK900630R0000-P-Identify-your-terminal-blocks-assembly-with-the-self-adhesive-label-adapted-to-the-LH-label-holders-P-ABB-1SNK900630R0000-White-Label-for-LH-Label-Holder » Check Price Now!

ABB 1SNK905303R0000 3 Pole Jumper Bar 5mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK905303R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK905303R0000

ABB 1SNK905304R0000 4 Pole Jumper Bar 5mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK905304R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK905304R0000

ABB 1SNK905305R0000 5 Pole Jumper Bar 5mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK905305R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK905305R0000

ABB 1SNK905350R0000 50 Pole Jumper Bar 5mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK905350R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK905350R0000

ABB 1SNK906303R0000 3 Pole Jumper Bar 6mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK906303R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK906303R0000

ABB 1SNK908302R0000 2 Pole Jumper Bar 8mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK908302R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK908302R0000

ABB 1SNK908305R0000 5 Pole Jumper Bar 8mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK908305R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK908305R0000

ABB 1SNK908310R0000 10 Pole Jumper Bar 8mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK908310R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK908310R0000

ABB 1SNK910303R0000 3 Pole Jumper Bar 10mm Pitch

ABB Jumper Bars, 2, 3, 4, 5,, 10, 50 pole, with 5, 6, 8, 10, 16, 22 and 26 pitch – ABB 1SNK910303R0000, Facilitate and secure your jumper bar assembly process with these jumper bars. They are screwless mounting, with pre-cut poles for various configurations. All jumper bars are insulated with positive locking. ABB 1SNK910303R0000

ABB 1SNK516020R0000 35mm² Feed Through Terminal Block Blue

ABB ZS35 35mm² Feed Through Terminal Blocks – ABB 1SNK516020R0000, Closed terminal block: No end section needed. Optimized rigidity. ABB 1SNK516020R0000 35mm² Feed Through Terminal Block Blue » Check Price Now!

ABB 1SNK516030R0000 35mm² Feed Through Terminal Block Orange

ABB ZS35 35mm² Feed Through Terminal Blocks – ABB 1SNK516030R0000, Closed terminal block: No end section needed. Optimized rigidity. ABB 1SNK516030R0000 35mm² Feed Through Terminal Block Orange » Check Price Now!

ABB 1SNK506220R0000 6mm² Double Deck Terminal , Blue 2

ABB 6mm² Double Deck Terminal Blocks – ABB 1SNK506220R0000, Save space with this double deck terminal block: 1 feed-through circuit and 1 ground circuit in just 6mm (0.236 inches) spacing. ABB 1SNK506220R0000 6mm² Double Deck Terminal , Blue 2 » Check Price Now!

ABB 1SNK900001R0000 End Stop

ABB Accessories for DIN Rail Terminal Blocks – ABB 1SNK900001R0000, Give efficient support to the SNK terminal blocks assemblies thanks to the BAM3 double gripping rail contact. Ease the assemblies identification with the BAM3 marking location compatible with all SNK markers and labels. ABB 1SNK900001R0000 End Stop » Check Price Now!

ABB 1SNK506230R0000 6mm² Double Deck Terminal Orange 2

ABB 6mm² Double Deck Terminal Blocks – ABB 1SNK506230R0000, Save space with this double deck terminal block: 1 feed-through circuit and 1 ground circuit in just 6mm (0.236 inches) spacing. ABB 1SNK506230R0000 6mm² Double Deck Terminal Orange 2 » Check Price Now!